Install Prerequisites

Install Docker and Docker Compose

Vera is designed to run inside Docker containers.  Use the following instructions to install Docker Engine on the installation machine.

Note:  This section can be skipped if Docker is already installed on the machine.

1. The Docker website provides instructions for installing Docker:

   1. Docker CE (recommended for Linux installations):  https://docs.docker.com/install/

If the docker compose --version command is recognized, then Docker is correctly installed.

Install Vera

Pre-configure Storage Locations

Vera uses folder mapping (volume mounting) to create persistent storage outside of the Docker containers.  The first step of installation is to create a folder location for each storage item listed below.  Tricentis default recommendations are provided, but any storage location (drive and/or folder) may be selected.

1. Create Storage Locations:  Use the following table as guidance to select storage locations for the Vera items listed. You can choose any location you like, or you can follow Tricentis default recommendation. NOTE: For Linux, paths are case sensitive.

2. Create Folders:  Create the following folders within the Vera Data Directory selected above.

Create folders ()

sudo mkdir -p /var/lib/vera/data/db
sudo mkdir /var/lib/vera/Logs
sudo mkdir /var/lib/vera/UserImports
sudo mkdir /var/lib/vera/Certificates
sudo mkdir /var/lib/vera/Mongo-Setup
sudo mkdir /var/lib/vera/Configs

3. Stage Vera Web Portal Configurations:  Copy to the Configs directory created in Step 2.

4. Stage MongoDB Setup Script:  Copy to the Mongo-Setup directory created in Step 2.

   You may want to change the default passwords in the script file. If you do, be sure to use the correct passwords in the docker-compose file below.

5. Stage User Import File:  If desired, copy a CSV file containing initial user definitions into the UserImports directory created in Step 2. See Import Vera users. 

   Sample User import CSV file( )

   User Name,Full Name,Email,System Roles,IdP,IdP User Name
   vera_admin,Default Vera Administrator,vera_admin@tricentis.com,System Administrator,Vera,vera_admin:ChangeThis1Pwd

Open TCP/IP Ports

Both the Vera Web Portal and the Vera Server (API) require the ability to receive inbound HTTP traffic.  Each component can accept traffic via HTTP, HTTPS, or both.  

1. Select Ports:  Select an HTTP and/or HTTPS port for the Vera Web Portal and the Vera Server (API).  Default recommendations are provided, but any ports may be selected.
   

2. Configure the installation machine's firewall to open each selected port for incoming traffic.

Create a JWT Certificate

Vera uses JSON Web Tokens (JWT) to securely transmit information between clients and the Vera Server API. These JWTs are digitally "signed" during creation so that their integrity can be verified on subsequent calls without requiring the user to provide login information. A certificate is required to "sign" the JWT. The certificate must be in the PKCS#12 format and can be from a trusted source or a self-signed certificate. The instructions below will create a self-signed certificate in the proper format and upload it to the appropriate location.

1. Create a Private Key for use in the certificate.

   openssl genrsa -aes256 -out private.pass.pem 2048
   openssl rsa -in private.pass.pem -out key.pem

2. Create the Self-Signing Request. Enter the information requested during the certificate creation.

   openssl req -new -key key.pem -out server.csr

3. Generate the Self-Sign Certificate.

   openssl x509 -req -sha256 -days 3650 -in server.csr -signkey key.pem -out jwt.crt

   The -days parameter above sets the expiration date for the self-signed certificate.  We recommend setting the expiration to be 3650 days (approx. 10 yrs), but this can be modified based on your local security requirements.  Setting a shorter expiration only requires the certificate to be regenerated more frequently.

4. Generate a PFX file from the certificate and private key. Provide a password for the PFX file, and make note of the password for a later use in the installation.

   openssl pkcs12 -export -out jwt.pfx -inkey key.pem -in jwt.crt

   You must provide a password when creating the PFX file. 

5. Copy the PFX file to the Certificates directory for Vera Server.

Create or Provide a Service Provider Certificate and Private Key

Vera acts as a SAML Service Provider for Single Sign-On. This requires Vera to have a certificate available for signing SAML Requests that are sent to the SAML Identity Provider. The certificates are required for the Web Portal to start up, even if you are not using the SSO feature. The certificate and key must be in the PEM format. The simplest way to provide these is to use the certificate and key files created above when creating the JWT certificate. If needed, you can follow the instructions below to create a new certificate and key file for the Service Provider.

1. Create a Private Key for use in the certificate.

   openssl genrsa -aes256 -out sp-private.pass.pem 2048
   openssl rsa -in sp-private.pass.pem -out sp-privatekey.pem

2. Create the Self-Signing Request. Enter the information requested during the certificate creation.

   openssl req -new -key sp-privatekey.pem -out sp-server.csr

3. Generate the Self-Sign Certificate.

   openssl x509 -req -sha256 -in sp-server.csr -signkey sp-privatekey.pem -out sp-publiccert.crt

4. Copy the certificate and private key files to the Certificates directory for Vera Server.

5. Ensure that the config.yaml file is updated with the correct filenames for the following parameters:

Configure Docker Orchestration (Docker Compose)

1. Download the Vera Docker Compose file for: 

2. Place the file in the Vera Server Install Directory selected previously.

3. Download the Vera Environment file:

   1. For a filled in example, see below.

4. Place the file in the Vera Server Install Directory selected previously.

5. Update the .env file with the configurations below. Do not update the docker-compose.yml file directly unless you know what you are doing.

   1. NOTE: You should not need to update the docker-compose.yml file directly. That file will load the variables from the .env file when it is started by Docker. For custom configurations, see below for examples or contact your account representative.

6. Configure Vera Installation Properties -- Set the following variables in the .env file:

5. Configure Vera Server Encryption Key:  Vera Server encrypts stored user passwords. You must supply the encryption key for Vera to use to encrypt and decrypt user passwords. The encryption key is stored in the following environment variable of the docker compose file:

6. Configure Vera Server JWT Certificate and Password: Vera Server uses JWTs to authenticate users. A certificate must be present on the server in order to validate incoming JWTs. The certificate is stored in the Certificates directory and must be in the PFX format.  A password-protected PFX certificate file should have been created during an earlier step of these instructions.  Provide the filename and password of the generated PFX file in the following environment variables of the docker compose file:

7. Configure Ports:  Update the following ports based on the setup above:

8. Configure Web Portal URL:

Enable/Disable HTTPS for the Vera Server (API)

Choose whether to enable or disable support for HTTPS in the Vera Server (API).

To Enable HTTPS for API

1. Export the server's certificate as a password-protected PFX file, and store the file in the Certificates directory configured previously.

2. Edit the .env file as follows:

To Disable HTTPS for API

Edit the docker-compose.yml file by changing the following configurations:

1. Under the “ports” section of the following services: vera.server, vera.api.qtest.routeactions, vera.api.jira.routeactions, remove the HTTPS port entry.

   1. Examples:

      1. "${VERA_SERVER_HTTPS_PORT}:5001"

      2. "${VERA_QTEST_HTTPS_PORT}:443"

      3. "${VERA_JIRA_HTTPS_PORT}:443"

2. Delete the ASPNETCORE_Kestrel__Certificates__Default__Path environment variable configurations.

3. Delete the ASPNETCORE_Kestrel__Certificates__Default__Password environment variable configurations.

4. Edit the ASPNETCORE_URLS environment variable configurations for all services as follows:

   1. Old Value: http://+:5000;https://+:5001

   2. New Value: http://+:5000

Enable/Disable HTTPS for the Vera Web Portal

Choose whether to enable or disable support for HTTPS in the Vera Web Portal.

To Enable HTTPS for Web Portal

1. Obtain a valid SSL certificate registered for the installation machine's domain name.

2. Export the server's certificate as a password-protected PFX file, and store the file in the Certificates directory configured previously.

3. Edit the .env file as follows:

To Disable HTTPS for Web Portal

Delete the web portal's SSL port mapping configuration from the docker-compose.yml file.   

1. Under the “ports” section of the vera.web.portal service, remove the HTTPS port entry:

   1. "${VERA_WEB_PORTAL_HTTPS_PORT}:443"

2. Delete the VERA_WEB_HTTPS_FILE environment variable configuration.

3. Delete the VERA_WEB_HTTPS_PASS environment variable configuration.

Configure a MongoDB Container

1. Edit the .env file as follows:

2. Download the MongoDB Docker Compose Setup file:  

3. Place the file in the Vera Server Data Directory selected previously.  (NOTE:  It is important that the setup-mongo.yaml file be located in the same directory as the docker-compose.yml file.)

4. Navigate to the Vera Server Data Directory.

5. Execute the following command:  docker compose -f ./setup-mongo.yaml up

   1. If you get the error: "Couldn't connect to Docker deamon - is it running?"

   2. Log out of the server, log back in, and start Docker with sudo service docker start

6. Wait for MongoDB to download and extract, and for the script to complete.  When completed, the user will see a message instructing them to press Ctrl+C to exit.

7. Use Ctrl + C to exit the script and to stop the MongoDB container.

Configure a RabbitMQ Container

1. Edit the .env file as follows:

2. Download the RabbitMQ Docker Compose file:  

3. Launch the RabbitMQ container.

   1. docker-compose -f .\rabbitmq.yml up -d

Download/Launch the Vera Containers

1. Navigate to the Vera Server Install Directory.

2. Execute the following commands:

   1. docker login veraserver20190209075900.azurecr.io -u fc12bdd5-6753-40b3-a4da-32bc5d451b39 -p bhfV1g0RhN1O~xS-R-Osv67~HO.zeKMbHp

   2. docker compose up -d

3. Wait for the services to start.

   1. You can check container processes by executing docker ps – containers should running consistently and appear healthy.

4. Verify that you can access the Vera Web Portal at the expected port.